Olympus IPLEX LX Series, Инструкция по эксплуатации

Страница: 32 / 168

24
Chapter 3 Preparation and inspection before observation
For 8.5-mm type
Remove the equipment in the order of: Insertion tube
→
Main unit and
control unit.
WARNING
• Fully open the top cover when removing the main unit from the case. If the cover is not fully
open, it can close unexpectedly and pinch your hand or cables.
• Never use the main unit while it is accommodated inside the case. If the top cover of the case
is left open, it may close unexpectedly and pinch your hand or a cable.
CAUTION
• Place the case on a level surface so it is stable.
• To open the top cover of the case, release the latch on the front of the case.
• Do not pull the insertion tube with excessive force when taking it out of the cushioned slot.
Otherwise, the insertion tube may be damaged.
• When taking the control unit or main unit out of the case, never hold them by the insertion
tube or universal cable. It may damage the instrument.
• Check if the insertion tube, battery cover, video connector cap and adapter connector cap are
kept clean. Wipe off with a clean, soft cloth if dirt or a foreign substance is attached.
• Check the insertion tube, battery cover, video connector cap and adapter connector cap if
cuts or gaps are not available.
Handle
Remove the insertion tube. Grasp the handle and remove the
main unit with the control unit
affixed to its back.
Main unit and control unit
Insertion
tube