Olympus IPLEX LX Series, Инструкция по эксплуатации

Страница: 120 / 168

112
Chapter 6 Measurement procedures (LX only)
• If dirt is on the white indented part of the check tool, it may not be able to capture an
adequate white image. In this case, remove the guide, which is the part with the holes for the
forward-view and side-view guides for optical adapter, from the white indented part and clean
out the dirt.
The guide can be removed by turning it counterclockwise. Use a gauze cloth with soapy
water to wipe off the dirt. To reattach the guide, repeat these steps in reverse order.
9
The optical data for the new stereo optical adapter is stored in the
main unit’s internal memory when the white image has been
captured successfully. Then the “NEW STEREO ADAPTER” is
completed.
The following message is displayed. Remove the optical data media (USB
memory) from the USB connector and then select “OK” and press the [MEAS/
ENTER] joystick.
10
Keep the optical data media (USB memory) in the optical adapter
case so it does not get lost.
NOTE
• After a new stereo setup is completed, a file with the name “IV7CALIB\FREEZE.JPG” is
created on the optical data media (USB memory). Removing this file does not affect
operation.