Olympic Medical BILI-LITE 33, Инструкция по эксплуатации, Страница: 24 / 56

3-2 OLYMPIC BILI-LITE Model 33/34 Instruction Manual
Operating the Bili-Lite
Operating the Bili-Lite
To operate the Bili-Lite:
1
Plug in the power cord, then press the power switch to the
ON
(|) position.
2
Position the Bili-Lite so that maximum light (irradiance) is delivered to the
patient’s exposed skin area:
„
Reposition the lamp position via its caster wheels
„
Raise and lower the light hood
„
Tilt the light hood
3
Lock the casters to maintain the correct position over the patient.
Figure 3.1
Locking the caster wheels
Positioning the Light Hood
To raise or lower the light hood:
„
Turn the height adjustment knob counterclockwise (see Figure 2.1 on page 2-2).
Move the light hood to the desired height, then tighten the knob.
To tilt the light hood:
1
Support the light hood with one hand (see Figure 2.1 on page 2-2).
2
Rotate the adjustment knob on top of the light hood to the desired position.
3
Gently release the light hood and check the position.
NOTE
#
The hospital/facility is responsible for ensuring that all personnel who operate or maintain
this device are trained in its operation and safe use, and for maintaining training records of
attendance and evidence of understanding.
CAUTION
„
Place the bottom of the Bili-Lite light hood at least 20 in. (51 cm) from the patient to
avoid overheating the patient and to avoid ultraviolet and infrared exposure.
„
Place the bottom of the Bili-Lite light hood at least 3 in. (7.6 cm) from the top of the
incubator to avoid overheating the patient.
Flip up to
unlock
Push down
to lock
NOTE
#
For the light hood to tilt, your Bili-Lite must have the tilt assembly mechanism installed. To
order a tilt assembly for your Model 33/34, see
Ordering Information on page 7-1.