Olympic Medical BILI-LITE 33 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 56

Olympic Medical BILI-LITE 33 Скачать руководство пользователя страница 21

OLYMPIC BILI-LITE

Model 33/34 Instruction Manual

2-7

Installing the Bili-Timer on the Bili-Lite

Installing the Bili-Timer on the Bili-Lite

The Model 34 includes an Olympic Bili-Timer. The Bili-Timer is a portable,
battery-operated digital timer that automatically measures total phototherapy
exposure time.

Required Items:

Bili-Timer mounting kit, which includes three strips of Velcro

®

hook-and-loop tape:

Two 5-in. (12.7-cm) strips for mounting the readout

One 1.5-in. (3.8-cm) strip for mounting the sensor

To install the Bili-Timer:

1

Place the two 5-in. strips of loop material (soft side) onto the Velcro hook

material (rough side) on the back of the Bili-Timer.

2

Peel the backing off of the hook material to expose the adhesive, then position

the Bili-Timer on the phototherapy light, and press into place (see Figure 2.7).

Figure 2.7

Mounting the Bili-Timer

3

Place the 1.5 in. (3.8 cm) strip of loop material (soft side) onto the hook

material (rough side) on the back of the sensor.

4

Peel the backing off of the hook material to expose the adhesive, then position

the sensor 1/8 in. (0.3 cm) from the safety shield on the inside the light, and

press into place (see Figure 2.7).

NOTE

#

Make sure the readout and sensor locations do not interfere with the operation or
movement of the phototherapy light.

Velcro loop tape

Safety shield

Sensor tip 1/8 in. (0.3 cm)
from the shield

Bili-Timer

Light hood

NOTE

#

The tip of the sensor should be 1/8 in. (0.3 cm) below the protective shield on the
underside of the light.

The Bili-Timer can be removed and replaced as necessary.

To operate the timer, refer to the

Olympic Bili-Timer Model 20 Instruction Manual

.

«
...
19
20
21
22
23
...
»

Содержание BILI-LITE 33

























































Отзывы:

Нет отзывов