Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia 2012
Page 153
All Rights Reserved!
8.5
Order type system
The order type system organises the printout of orders on the cash register. Order type names ensure that PLUs with the
same order number are printed on the same receipt. These order messages are then printed in succession. The order
type system is activated when the PLU was assigned an order type name during PLU programming (also see
Chapter 6.6.1.10).
8.6
Printing a table view (review)
A table view can be printed out on the ECR printer at any time. It does not relate to a bill but to a kind of "table review"
indicating what items have been recorded for the table until now. For this reason, the view does not have the attributes of
a bill.
Example:
PLU number 10 is registered for table 1 at
€ 100.00. A table view should be printed.
1.
Set the key to REG.
Input
Receipt
2.
Enter the table number.
3.
Press the
┣Open Table┫
key.
TABLE
1
10
100.00T1
.
.
.
Subtotal
100.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4.
Press the
┣Bill Print┫
key.
8.7
Error corrections/Voids within the table system
Proceed as described in Chapter 7.10.2 to correct/cancel PLU registrations within the scope of the table system.
Example:
Three items were registered within the scope of the table system: PLUs 1 to 3 at fixed price 1. PLU 2 should
be cancelled (void).
Input
Display
Receipt
1.
Set the key to REG.
2.
Enter the table number.
3.
Press the
┣Open Table┫
key.
T1
6.00
PLU 1
2.00
PLU 2
2.00
PLU 3
2.00
4.
Use the
┣↑┫
and
┣↓┫
keys
to move to the item to be
cancelled.
PLU 2
2.00
5.
Press the
┣Correct┫
key to
clear the item selected.
Note:
If you only want to cancel a partial amount, enter it at this
point and then press the
┣VOID┫
key. The partial amount is
deducted. The remaining amount appears in the display.
TABLE 1
-1x Plu 1
-4.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6.
Press the
┣Open Table┫
key
to exit from the table sys-
tem.
The cash register prints a slip
for the correction.
