Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia 2012
Page 124
All Rights Reserved!
6.37
Programming rounding
The cash register always rounds the totals after pressing the
┣SUB-TOTAL┫
and
┣CASH┫
keys.
6.37.1
Programming rounding for received on account/paid out and for tax calculation
You can define whether calculations for receiving on account / paying out and for tax should be rounded up or down after
selecting the type of rounding required.
If no special European rounding methods are selected, the standard commercial 5/4 rounding is applied:
If the first decimal place to be rounded is a 0, 1, 2, 3 or 4, the number is rounded down.
If the first decimal place to be rounded is a 5, 6, 7, 8 or 9, the number is rounded up.
6.37.1.1
Programming rounding for receiving on account / paid out
Significance
Rounding code A
Always round down
0
Rounding (according to rounding method selected)
1
Always round up
2
Example:
An amount received on account or paid out should always be rounded up.
1.
Set the key to PRG
2.
Select
programming number
50
(see Chapter 6.1.2).
3.
Press the
┣CASH┫
key to con-
firm the input.
Input
Display
=ROUNDING PO-RA%- 1=
[0]
4.
Enter the rounding code using
the digit keys.
[2 ]
5.
Save the programmed data by
pressing the
┣CASH┫
key.
Save...!!
Please Continue...
6.
Conclude programming by
pressing the
┣SUB-TOTAL┫
key.