Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia 2012
Page 110
All Rights Reserved!
6.31
Programming the kitchen file names
Orders can be transferred directly to the kitchen and printed on an external kitchen printer.
There are 8 different printout versions of kitchen receipts (see Chapter 6.6.1.10) which combine the printing of order
messages and single messages and which are transferred to a kitchen printer. With regard to these 8 variations, the
default setting is for the respective variation number (KP #) to be printed at the top of the kitchen receipt.
A kitchen file name can be programmed instead of the variation number, e.g. to specify the section within the kitchen in
which the food was prepared (cold food, hot food, salads, etc.).
Up to 8 kitchen file names can be programmed, each with a maximum of 24 characters.
Example:
"Salads" should be programmed instead of KD#6.
1.
Set the key to PRG.
2.
Select
programming number 43
(see Chapter 6.1.2).
3.
Press the
┣CASH┫
key to confirm
the input.
Input
Display
Kitchen Files
00- 1 1
[
] name
[ ]
COM-PORT No.
4.
Use the
┣CASH┫
key to select the
required memory location (1 to
8).
5x
Kitchen Files
00- 6 1
[
] name
[ ]
COM-PORT No.
5.
Use the
┣↑┫
and
┣↓┫
keys to
move to the
[ ] name
input area.
[
] name
6.
Press the
┣CASH┫
key to confirm
the input.
7.
Enter the required kitchen file
name (max. 18 characters) (see
Chapter 6.2)
Procedure
see Chapter 6.2
Salads
8.
Press the
┣CASH┫
key to confirm
the input.
[Salads
] name
Note:
The
[ ] .
COM-PORT No.
area is reserved and
cannot be programmed
with this cash register
model.
9.
Conclude programming by press-
ing the
┣SUB-TOTAL┫
key.
