Olympia 160 V HF UF, Инструкция по эксплуатации

Страница: 42 / 92

-
Make sure a check valve is equipped between the device and water heater when a
heating stove or water heater is connected behind the device, in case of hot water reflux
and damage the inner system of the product.
-
Before installing the pipeline, please clean the residual impurity and dust in the
pipeline. After the main water inlet is closed, connect it with the device.
-
All of pipeline that used should meet the relevant regulations, and the installation
should accord with the local installation rules.
-
When installing, please keep a certain operation space for adding salt, cleaning and
maintaining.
8.2 Installation and connection
-
It must respect the diameters of connection of the equipment in both the inlet and
outlet, and the drain connection.
-
Pipeline installation and connection should conform to the local installation rules.
Inlet/outlet should be connected with the water pipe in the same axis (Refer to the below
installation picture). The position of inlet and outlet shouldn’t be reversed.
-
The DLFC that we support must be inserted into the drain outlet.
The inlet, outlet pipeline, drain line and overflow pipeline should be connected in
sequence and make sure there are no leakage of each joint. It is suggested to use hose
pipe to connect the softener with inlet, outlet, drain connector and overflow connector.
Attention: the pipe fitting and valves that used should be made of 304 stainless steel,
alloy copper forging, or high strength engineering plastics, etc. the iron pipe fitting and
valves is forbidden to be used.
-
It is suggested to install a manual bypass valve between the main water inlet and
inlet/outlet of the device, making it convenient for installation and maintenance. (Refer
to the below installation picture).
42 OLYMPIA PLUS-CEASA