PARTS NOTES
1.
Gooseneck tap
2.
Top cover
3.
Drinking water tap
4.
Water tray
5.
3-way valve
6.
Drainage elbow
7.
Waste water pipe
8.
In –water screw cap
9.
Plug line
10.
Junction box
11.
Condensor
12.
Water tee connection
13.
Water inlet valve
14.
Dryness filter
15.
Capillary tube
16.
Side pannel
17.
Cold thermostat
18.
On/off button
19.
Evaporator
20.
Cold tank
21.
Compressor
22.
Protector
23.
Starter
24.
Protective cover
25.
Wire
26.
Anti-shock pad
27.
Bolt
28.
Rubber foot
29.
Front pannel
4
5
6
7
1
2
3
8
9
10
11
12
13
14
15
16
17
18
19
20
24
25
26
27
28
29
23
22
21
MANUAL INSTRUCTIONS
1.
THIS DEVICE IS INTENDED TO BE USED IN DOMESTIC
AND SILIAR APPLICATION.
2.
THIS DEVICE CAN BE UISED BY CHILDREN WITH AGED
8YEARS
AND
PEOPLE
WITH
REDUCED
PHYSICAL,SENSORY OR MENTAL ABILITIES OR LACK OF
EXPERIENCE AND KNOWLEDGE,IF THEY HAVE BEEN
GIVEN SUPERVISION OR APPROPRIATE TRAINING
REGARDING THE USE OF DEVICE IN A SAFE MANNER
AND UNDERSTAND THE DANGERS INVOLVED.
3.
CHILDREN SHOULD NOT PLAY WITH THE DEVICE.
4.
CLEANING AND MAINTENANCE TO BE PERFORMED BY
THE USER SHOULD NOT BE CARRIED OUT BY CHILDREN
WITHOUT SUPERVISION.
5.
IF THE POWER CABLE IS DAMAGED, IT MUST BE
REPLACED BY THE MANUFACTURER OR BY ITS
AFTER-SALES
SERVICE
OR
SILIAR
QIALITIED
PERSONNEL IN ORDER TO AVOID A DANGER.
OPERATION AND MAINTENANCE
A Maintenance for the machine
1.
Please often clean the surface of the water cooler machine
and keep it clean.
2.
Do not pour tea dregs into the basin to avoid blocking up
the drain pipe.
3.
Cut off the power if long time of no using (over three
days)to avoid overheating.
4.
Shall keep the surroundings and the ground near the
machine dry, if there are leakages, shall close the water
recourse and cut off the power, and then inform our
company or agents.
B Maintenance for the filter element
1.
Two filter elements usually need to be changed one time
in 3-6months or so, (it differs from water quality and
quantity)to avoid the appearances of dregs and bacterium
etc. Please purchase them from the distributors of our
company.
2.
Shall cut off the power when replacing the filter elements,
close the water recourse and open the front panel, back-out
the shell of the filter element clockwise( there are special
tools provided with the machine), tear off the filter element,
change new filter element( at the position of the inlet, it is
colating at the position of the outlet, it is finely filtering),
screw the shell of the filter element counter clockwise.
OPERATION INSTRUCTION
Running water clarification type
Water Cooler
Ref. 09001
PRECAUTION
Don’t connect the power until the water
comes out after opening the water tap!
•
Parts notes
•
Manual instruction
•
Operation and maintenance
•
Installation
•
Features
•
Technical data
•
Maintenance
•
Annex list
Before installation, please read the
booklet of directions in every detail so as
to understand corrects methods for
installation and operation. please take
care of this booklet of directions and the
guarantee statement.
