Olympia 160 V HF UF, Инструкция по эксплуатации

Страница: 44 / 92

Parameter setting (User mode)
Parameter Set Arrange Factory Default Actual value
Time of day 00:00 ~ 23:59 Currenttime
Regeneration time 00:00 ~ 23:59 2:00:00 am
Water hardness 50 ~ 1500 mg/L 400 mg/L
*For calculation of water hardness, use the following method: 1ºF (French degree)=10 mg/L CaCO3
Adjust parameters User (Foreground)
KEYBOARD LOCK indicator. With the activated indicator, the keypad is locked. Pressing a key does not
activate anything. (This function block is set to 1 minute, and lights up when the keyboard is locked).
Unlocking solution: Press and hold both ▼▲ for 5 seconds until the symbol goes off.
VALIDATION button. Press when the equipment is in service, and placed in settings mode.
Under the settings status, press and digits blink. In this position you can set the desired parameter by scrolling
Menu by pressing the ▼▲ keys.
After setting, press and return to the setup menu. The data is stored and a “beep” is heard confirmation.
REGENERATION button. Click on the service, and the system will enter in regeneration mode. (Example: If
water quality is not correct, unlock the keypad and press to start regeneration immediately. During each
regeneration cycle you can go forward by pressing this key).
Also press the REGENERATION for return to service, being in the state of adjustment programming.
Up and Down keys (▼▲). In the state of program settings, press ▼ or ▲ to display the parameters. Within
each parameter of the program, press to adjust values.
Press and hold both for 5 seconds to lock and unlock the keyboard.
This valve acts to intelligently Softening equipment (estimated capacity of soft water between
regenerations) and filtration mode regenerates days (programmable in Background)
Confirm Regeneration Up
Down
44 OLYMPIA PLUS-CEASA