Olympia 160 V HF UF, Инструкция по эксплуатации

Страница: 46 / 92

1.Pulsar "validation" and enter "Set parameters" menu,
as shown in Figure LR1. LR4
2. Pr
ess the (▼) 2 times and select the “Set Water
Water Hardness”; then press “validation” and LR4 screens appears.
Set Water
Hardness
hardness
The hardness value "150" will blink, and by (▼▲) is introduced
150 mg/L
The hardness value measured at the entrance.
3. Finally, press “validation” and hear a “beep” that confirms
the memorization of changes.
L1
›› Set Mode
******************************* Set Valve Model
F105
►►►►►►
Set Type
******************************* Set Flow Rate Unit
↓
Values Programming steps Screen
LT1
Under the Technician mode (L2)
1. Select “Set Language
” parameter by (▼▲)
Set Language
Set Language 2. Press “validation” and select Español or English (LT1)
○
Español
3. Press “validation” to return to the Technician mode (L2)
●
English
LT2
Under the Technician model (L2)
Set Type
↑
Set Type 1. Select “Set Type
” parameter by (▼▲) ○ Cronometric
2. Press “validation” and select Cronometric or Volumetric (LT2)
● Volumetric
3. Press “validation” to return to the Technician mode (L2)
LT3
Under the Technician model (L2)
Set Flow 1. Select “Set Flow Rate Unit
” parameter by (▼▲)
Set Flow Rate Unit
Rate Unit 2. Press “validation” and select gal, liters or m ³ (LT3)
○
gal
3. Press “validation” to return to the Technician mode (L2)
○
L
●
m ³
After adjusting the parameters, the display shows the volume of water that can be treated.
Technical parameters setting mode (Background)
Valve programming process. TECHNICIAN mode.
A. Technical Mode Selection
During the 6 seconds the screen L1 to connect the unit to the mains appears, press "regene down" key to
simultaneously and hold for about 3 seconds to enter Menu Technical L2 (Background).
B. Adjust Parameters
Under the Technician mode (L2), you can adjust the following parameters. Operation mode (Filtration/Softening),
Valve model, control type, flow unit, volume of resins, interval of regeneration days, backwash time, Brine and show
resin time, brine and fast rinse time.
46 OLYMPIA PLUS-CEASA