background image

5-4

Section 5 Replacing Consumables and Maintenance

13

13. Hold  down  the  right  side  of  the  toner  cartridge  with  one

hand  and,  with  the  other  hand,  push  the  toner  cartridge
release lever away from you until it stops.

14

14. Gently close the facsimile.

* After  replacing  the  toner  cartridge,  perform  the

appropriate operation to clean the main charger. Refer to
“(1) Cleaning the Main Charger”, page 5-5.

11

1. Press the main body release button and open the facsimile.

22

2. Grasp  the  handles  on  each  side  of  the  old  imaging  unit  as

shown in the illustration and lift the unit all the way out of the
facsimile.

33

3. Remove  the  new  imaging  unit  from  its  box.  Tear  open  the

package  for  the  imaging  unit  at  the  notch 

,  and  take  the

imaging unit out.

1

If “REPLACE IU” appears in the message display, it is time to replace
the  imaging  unit.  Although  a  limited  number  of  sheets  may  still  be
printed out, the imaging unit should be replaced as soon as possible.
If you continue to use the facsimile without replacing the imaging unit,
after  a  certain  amount  of  time  “REPLACE  IU”  will  be  the  only
message  shown  in  the  message  display  and  print  out  will  not  be
possible.

* The drum portion of the imaging unit (protected with a black sheet of

paper)  is  extremely  sensitive  to  light  and  can  easily  become  soiled
as well. During replacement of the imaging unit, BE SURE to protect
the drum from direct exposure to strong light and BE CAREFUL that
you  do  not  touch  the  surface  of  the  drum  with  your  hands  or  other
foreign objects.

REPLACE IU
SET DOCUMENT

REPLACE IU

Replacing the Imaging Unit

WARNING

High voltage is present in the charger section. 
Take  sufficient  care  when  working  in  this  area,  as
there is a danger of electrical shock.

CAUTION

The facsimile’s fixing unit is extremely hot. 
Take  sufficient  care  when  working  in  this  area,  as
there is a danger of getting burned.

CAUTION

Do  not  incinerate  toner  and  toner  containers.
Dangerous sparks may cause burn.

05/Consumables(En)/E.q  13-07-2000 15:31  Pagina 4

Содержание OFX8800
























































































































































Отзывы: