Olivetti d-Copia 300, Руководство по обслуживанию

Страница: 241 / 351

2FD/2FF/2FG
1-6-12
(3-3) Adjusting the center line of image printing
Make the following adjustment if there is a regular error between the center lines of the copy image and original when
paper is fed from the drawer.
U034
U067
(P. 1-6-30)
U072
(P. 1-4-27)
Caution:
Check the copy image after the adjustment. If the image is still incorrect, perform the above adjustments in maintenance
mode.
Procedure
Center line of printing
Correct image Output
example 1
Output
example 2
Figure 1-6-23
Yes
No
Start
Enter maintenance mode.
Enter “034” using the numeric keys.
Press the start key.
Press the interrupt key.
Press the start key to output a test
pattern.
Is the image correct?
Press the start key.
The new setting is stored.
Press the stop/clear key to exit
maintenance mode.
End
For output example 1, decrease
the value using the cursor down key.
For output example 2, increase
the value using the cursor up key.
Setting range (initial setting)
LSU OUT: –10.0 – +10.0 (1.0)
LSU OUT (DUP): –5.0 – +5.0 (0)
Changing the value by 1 moves the
center line by 0.1 mm.
LSU OUT: Optical axis adjustment data
LSU OUT (DUP): Optical axis adjustment
data for duplex copying
(second face)
Select the item to be adjusted.