Olivetti d-COLOR MF3300, Функции и инструкции по эксплуатации

Страница: 26 / 163

1-18 d-Color MF 3300/3800
Available operations in Administrator mode 1 1.5
[Machine Settings]
To display: Administrator mode - [System] - [Machine Settings] - [Machine Settings]
Register device information of this machine, such as the name, installed place, and information of the admin-
istrator.
Item Description
[Device Name] Enter the name of this machine (using up to 127 bytes).
The name specified here is used as a part of the subject of Internet fax.
[Device Location] Enter the location of this machine (using up to 127 bytes).
[Device Information] Enter the information of this machine (using up to 127 bytes).
[Administrator Name] Enter the machine administrator name (using up to 127 bytes).
[Administrator E-mail
Address] Enter the E-mail address of the machine administrator (using ASCII characters
of up to 320 bytes).
[Do Startup Page] Select whether or not to print the start page when this machine is turned on.
[Off] is specified by default.
[Unit of Measure] Select a system of units that are normally used.
The default value depends on the region the machine is used in.
[Sleep Mode Settings] Select whether or not to enable the Sleep mode.
[On] is specified by default.
[Sleep Mode Time] Change the time required to automatically change to Sleep mode after you did
not operate this machine.
The default value depends on the region the machine is used in.
[Low Power Time] Change the time period before the machine status is automatically changed to
Low Power mode if it is not used for the specified length of time.
The default value depends on the region the machine is used in.
[Entering Power Save
Mode] When this machine receives a print job from a fax machine or computer in
Power Save mode, select the timing to switch to Power Save mode after the
print job has completed.
•
[Normal]: Switches the machine status at the time specified in [Low Power
Time] or [Sleep Mode Time].
• [Immediately]: Switches to Power Save mode immediately after a print job
has ended.
[Immediately] is specified by default.
[Power Consumption in
Sleep Mode] Select whether or not to reduce the power consumption in Sleep mode.
•
[Enable]: Further reduces power consumption in Sleep mode. Select [Ena-
ble] in normal conditions.
• [Disable]: Select this option if a smooth network communication is not es-
tablished while [Enable] is specified.
[Enable] is specified by default.
[Power Key Setting] Select whether to use the Power key on the Control Panel as a sub power
OFF key or as a power save key.
•
[Power Save]: Press the Power key briefly to shift to Power Save mode
(Low Power or Sleep mode). Hold down the Power key to turn the sub pow-
er off.
• [Sub Power Off]: Press the Power key briefly to turn the sub power off. If
the Power key is held down, Power Save mode shifts to ErP Auto Power
Off mode (near the status when the main power is turned off), which offers
a higher power saving effect than that in Sub Power Off mode.
The default value depends on the region the machine is used in.
[Power Save Setting] Select the type of power save mode when pressing the Power key on the Con-
trol Panel .
• [Low Power]: Switches to Low Power mode. Turns off the Touch Panel
display to reduce power use.
• [Sleep]: Switches to Sleep mode. Sleep mode provides a greater power
saving effect than Low Power mode. However, the time required to return
to the normal mode is longer than the time required to recover from Low
Power mode.
[Low Power] is specified by default.
[Hide Personal Informa-
tion] Select whether or not to hide document names, in the [Job] tab.
[Off] is specified by default.