Olivetti d-COLOR MF3300, Функции и инструкции по эксплуатации

Страница: 125 / 163

d-Color MF 3300/3800 3-9
3.2 Using LPR/Port9100 connection for installation 3
17
Follow the on-screen instructions to carry out operations.
%
If the [User Account Control] window appears, click [Continue] or [Yes].
18
Click [Finish].
19
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] or [Devices and Printers] window.
20
Remove the CD/DVD-ROM from the CD/DVD-ROM drive.
Installation of the printer driver is then completed.
In Windows XP/Server 2003
0 Administrator privileges are required to perform this task.
1
Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.
2
From the Start menu, click [Printers and Faxes].
%
If [Printers and Faxes] is not displayed, select [Control Panel] - [Printers and Other Hardware] -
[Printers and Faxes] from the Start menu.
3
Select Printer Install.
% In Windows XP, select [Add a printer] from [Printer Tasks].
%
In Windows Server 2003, double-click [Add Printer].
[Add Printer Wizard] appears.
4
Click [Next >].
5
Select [Local printer attached to this computer], then click [Next >].
%
Clear the [Automatically detect and install my Plug and Play printer] check box.
The [Select a Printer Port] page appears.
6
Click [Create a new port:], then select [Standard TCP/IP Port] as the [Type of port:].
7
Click [Next >].
[Add Standard TCP/IP Printer Port Wizard] starts.
8
Click [Next >].
9
In the [Printer Name or IP Address:] box, enter the IP address for the machine, and then click [Next >].
%
If the [Additional Port Information Required] window appears, go to Step 10.
% If the [Finish] screen appears, go to Step 13.
10
Select the [Custom] check box, then click [Settings:].
11
Change the settings according to the port, and then click [OK].
% For an LPR connection, select the [LPR] check box, then enter "Print" in [Queue Name:]. You must
discriminate between upper and lower case letters when entering it.
% For the Port 9100 connection, select the [Raw] check box, then enter a RAW port number ([9100]
by default) in [Port Number:].
12
Click [Next >].
13
Click [Finish].
[Add Printer Wizard] appears.
14
Click [Have Disk...].
15
Click [Browse...].