Olivetti d-COLOR MF3300, Функции и инструкции по эксплуатации

Страница: 107 / 163

d-Color MF 3300/3800 2-29
2.9 Registering a destination 2
Tips
To use fax functions, optional units must be installed except in certain regions.
-
For d-Color MF 3800 : The optional Fax Kit FK-512 and Mount Kit MK-738 are required, excluding
models used in North America.
-
For d-Color MF 3300 : The optional Fax Kit FK-512 and Mount Kit MK-738 are required.
Registering an Internet fax address
An Internet fax address can be registered or edited using Web Connection .
In the administrator mode, select [Address] - [Address Book] - [Address Book List] - [New Registration] - [I-
Fax] - [Next], then configure the following settings.
Tips
To use the Internet fax function, optional units must be installed except in certain regions.
- For d-Color MF 3800 : The optional Fax Kit FK-512 and Mount Kit MK-738 are required, excluding
models used in North America.
- For d-Color MF 3300 : The optional Fax Kit FK-512 and Mount Kit MK-738 are required.
[Communication Set-
ting] If necessary, specify how to send a fax to a destination you want to register.
You may change the settings you made here before sending a fax.
•
[V34 Off]: V34 is a communication mode that is used for super G3 fax com-
munication. However, when the remote machine or this machine is con-
nected to a telephone line via PBX, you may not establish a communication
in super G3 mode depending on telephone line conditions. In this case, it
is recommended that you set the V34 mode to off to send data.
• [ECM Off]: ECM is an error correction mode defined by ITU-T (International
Telecommunication Union - Telecommunication Standardization Sector).
Fax machines equipped with the ECM feature communicate with each oth-
er, confirming that the sent data is free of errors. This prevents image blur-
ring caused by telephone line noise.
If you send a fax using a telephone line in an environment containing static,
it may take a longer time to communicate. In this case, the communication
time can be reduced by setting ECM to OFF for transmission. However, an
image error or communication errors may occur depending on the speci-
fied communication time value, so change the value to suit conditions.
• [Check Destination]: Select this option to use Check Dest. & Send. The fax
number specified for fax is checked against the destination fax number
(CSI), and the fax is sent only when they match.
Settings Description
Settings Description
[No.] Destination registration number. If you enter 0, the smallest available number
is automatically assigned. If you want to specify a number, enter the number
within the range of 1 to 2000.
[Name] Enter the destination name (using up to 72 bytes).
[Index] Select a corresponding character so that the destination can be index
searched by registration name.
If the [Main] check box is selected, you can easily specify a destination.
[E-mail Address] Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
[Compression Type] Select a compression type of the original data that the recipient machine can
receive.
[Paper Size] Select a paper size of the original data that the recipient machine can receive.
[Resolution] Select a resolution of the original data that the recipient machine can receive.