Oliver 4430.201 M-4430, Руководство пользователя

Страница: 21 / 65

4430 Planer OLIVERMACHINERY.NET 21 | Page
Additional Items Recommended for Machine Assembly
Item Purpose
Safety Glasses Protection
Disposable Gloves Protection
Paper Towel / Rags Cleaning
Rust Inhibitor Cast iron table top rust protection.
Straight edge Check alignments.
Metric Combination
Wrench Set Assembly and Maintenance
Metric Hex Wrench Set Assembly and Maintenance
Torque Wrench Cutter inserts installation and for checking Torx screw tension (50-55 lbs.-
inch).
T25 Star Bit Socket Cutter inserts installation.
Removing Machine from Crate
When all items are ready for setting up the
machine, gently remove the machine from the
pallet. The planer is equipped with casters so it
can be pushed off the pallet with the help of a
ramp.
The base of the planer is bolted onto the pallet
to prevent shifting during transport. Remove
these screws and brackets if you see them. You
may reuse the hardware if the machine is to be
bolted onto the floor.
If more lifting is needed, you may attach a pair of
1” lifting sling s to all 4 of the lifting points located
on the side of the planer. Be careful with the
power switch and the digital readout when
lifting the machine with lifting devices.
WARNING
4430 Planer has a net weight of 546 lbs. All lifting devices must be capable to
handle the load, or serious personal injury and machine damage may occur.