Oliver 4430.201 M-4430, Руководство пользователя

Страница: 28 / 65

28 | Page Oliver Machinery 4430 Planer
Digital Readout (DRO
)
The Wixey DRO allows operators to measure the depth
of the cut with 1/32” resolution.
•
Press the ON/OFF button to turn on/off the
DRO.
•
Press the MM/IN button to toggle the
measuring unit between metric (mm) and US
standard (inch). The fraction inch value will
appear if the measurement is a multiple of
1/32”
•
Press the ABS/INC button to toggle between
absolute measuring mode and incremental
mode.
•
Value in INC mode will be reset when switching
to ABS mode.
•
To reset the reading to zero in ABS mode, hold
the ON/OFF button
Feed Rate Control
4430 Planer can feed stock at 16/20 FPM (feet-per-minute). To change the feed rate, shift the position of
the feed rate control knob when the machine is running at full speed with no load:
•
Push in: 20 FPM
•
Pull out: 16 FPM
•
In-between: 0 FPM (Neutral)
IMPORTANT
Only change the feed rate when the machine is running at full speed. Failure to do
so may cause the gearbox to jam and damage the machine.