20
PERIODIC MAINTENANCE
• Inspect/test the magnetic switch before
each use. Do not operate the saw with a
damaged switch - replace a damaged
switch immediately
• Inspect the saw blade for damage or
chipped teeth before each use. Replace
a damaged or chipped blade immediately.
Never operate the saw with a damaged or
chipped blade
• Keep the saw table clean and free of dust,
pitch or glue. An occasional light coating of
paste wax can be use
to protect the cast-iron surface. Ask our
local distributor for suggestions on table
top cleaners and cast-iron sur- face
protection based on what is readily
available in your area.
• Occasionally open the cabinet door and
brush off and vacuum out accumulated
dust from inside the cabinet and on the
blade tilting gears and on or around the
motor.
• Periodically inspect the power cord and
plug for damage. To minimize the risk of
electric shock or fire, never operate the
saw with a damaged power cord or plug.
Replace a damaged power cord or plug
at the first sign of damage.
• To minimize airborne dust particles
periodically inspect all dust collection
fittings – retighten as needed.
WARNING:
MAKE SURE THE SAW HAS BEEN
TURNED OFF AND UNPLUGGED FROM THE
POWER SOURCE BEFORE PERFORMING ANY
MAINTENANCE.
Warning: Always wear safety glasses, a
respirator and hearing protection when
operating this machine
LUBRICATION & CLEAN
WARNING: ALWAYS TURN OFF AND
UNPLUG THE SAW BEFORE REMOVING/
NSTALLING A RIVING KNIFE.
Keep the blade height screw (under the table on
the left side) well lubricated and the blade tilt
screw (under the table on the right side) free of
dust or debris. Clean and remove dust, debris,
and old lubricant as needed depending on
frequency of use.
After cleaning, reapply lubricant as needed.
Note: Use any all-purpose grease, available at
any hard- ware store).
The motor and all bearings are sealed and
permanently lubricated–no further lubrication
is required. No other part of this table saw
needs lubrication.
Remove the motor cover A,Fig. 22 for blade
height screw A ,Fig.23 for lubricated . clean and
remove dust, debris as well.
Fig. 22
Fig. 23
Remove the storage box B, Fig.24 for clean
and remove dust, debris from dust Hood B, Fig.
24.
Fig. 24
!
！
!
！
A
B
C
C
