8
Miter Gauge Assembly
Blade Guard Assembly
Fence & 36” Rail Assembly
Option: 52” Rail & Right Table
10” TABLE SAW
Thank you for choosing this table saw.
This unit is carefully tested and inspected
before shipment and if properly used.
To ensure optimum performance and trouble
free operation a reasonable amount of care and
attention is required.
To get the most from your new table saw,
please take the time to read this manual before
assembling, installing and operating the unit.
The table saw features a circular blade
underneath that can be raised and lowered to
control the depth of cut.
The rail-mounted fence, which slides freely
toward or away from the blade, is used as the
main cutting guide for the workpiece.
The miter gauge is used to guide and support
the workpiece during the cut when the
workpiece cannot slide against the fence in a
stable manner that miter gauge body can be
rotated to allow a wide range of cutting angles.
The blade guard assembly is equipped
with a spreader . anti-kickback pawls and riving
knife, which work to prevent kickback and stop
or slow kickback if it happens. the riving knife is
used when the guard is removed for certain non
through cuts.
The push Stick is used to support the workpiece
during the cut and reduces the risk of injury by
keeping hands away from the blade while
cutting.
Cutting Capacities
Maximum depth of cut at 90
°
···················· 3-1/8in.
Maximum depth of cut at 45
°
···················· 2-1/4in.
Maximum rip to right of blade ······················ 36in.
Push Stick
Hex. Wrench 2.5mm * 1
Hex. Wrench 6mm * 1
Open Wench 8*10
Open Wrench 11*13
