6
8.
GF-REGULATOR (x1),
flow rate regulator for the premixed gas.
9.
TUBE-C (x1).
Blue rigid tube 6mm O.D. with attached a 4mm I.D. silicon transparent with a PTFE filter in the
middle. Use TUBE C to connect the gas output of the GF-REGULATOR to the gas input connector of Humidifier.
10.
Humidifer (x1
). It is composed of a glass bottle, Humidifier Bottle, with TUBE E (6 mm O.D. silicone tube with
a glass bubbler at the end) and its heater, Humidifier Heater.
11.
Heated Tube (x1).
Use Heated Tube to connect the Humidifier to Okolab H301 incubating chamber.
12.
Okolab H301 incubating chamber (required, to be ordered separately).
13.
OBJ-COLLAR (optional).
1
4
6
2
5
8
9
12
13
3
To premixed
gas supply
11
7
10
Figure 2. UNO-T-H-PREMIXED Equipment Overview.
UNO-T-H-CO2
Figure 3 illustrates the equipment overview for UNO-T-H-CO2 configuration:
1.
UNO-CONTROLLER (x1)
, temperature controller
2.
Y-CABLE-2 (x1).
To connect Humidifier and the Heated tube to the temperature controller.
3.
Y-CABLE-1 (x1).
To connect chamber’s base and lid to the temperature controller.
4.
24V-DC Power Adapter (x1)
.
5.
MINI-USB-OTG cable (x1).
To connect a USB pen to the temperature controller for data download
.
6.
Temperature Sensor (T Sensor) and extension (x1)
.
7.
OKO-AP (x1)
, air pump with 24V-DC power adapter.
