Page: 38
Service Guide ML380
Chapter 3 Maintenance & Disassembly
3.2.04 Space Rack
1. Perform this procedure: 3.2.02.
2. Remove the two screws (1) on the carriage plate (2). Do not remove the ribbon feed gear assembly.
3. Slide the carriage frame (3) in the direction of Arrow A, leaving the carriage plate in place.
4. Set the carriage plate under the space rack (4).
5. Release the claw (5).
6. Remove the B side of the space rack from the guide pin (6), and lift the space rack.
7. Remove the C side of the space rack from guide pin (7), and remove the space rack.
NOTE:
Perform the printhead gap adjustment procedure after installing this part.
Refer to Section 3.3 of this Service Handbook.
P/N 53510801 Rack: Space RSPL B.2.04
Содержание ML380
