OKIDATA ML380 Скачать руководство пользователя страница 114

Страница: 114 / 205

Page: 73

Service Guide ML380

Chapter 3 Maintenance & Disassembly

3.3.09 Resets

Reset Menu to Factory Defaults

CAUTION:

Once the menu has been reset, all customized menu settings will be lost.

Always print the menu before resetting the printer to factory defaults.

To reset the menu to factory default settings, follow this procedure.

1. Before resetting the Menu, Okidata STRONGLY RECOMMENDS printing the Menu.

Printing the Menu provides a reference of customized settings.

When the Menu is reset, all customized settings are LOST.

2. Power off the printer.

3. Press and hold SEL and FEED while powering ON the printer.

NOTE: Refer to the Printer Handbook for a list of the factory default settings.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание ML380

















































































































































































Результаты поиска

Содержание ML380

Отзывы:

Бренды по названию

Популярные бренды

OKIDATA ML380, Руководство по обслуживанию

Результаты поиска

Содержание ML380

Отзывы:

Бренды по названию

Популярные бренды