OKIDATA ML380, Руководство по обслуживанию

Страница: 55 / 205

Page: 37
Service Guide ML380
Chapter 3 Maintenance & Disassembly
3.2.03 Upper Cover Assembly
1. Perform this procedure: 3.2.01.
2. Remove the platen knob (1).
3. Raise the sheet separator (2), and pull it out diagonally in the direction of Arrow A.
4. Do the following to avoid interference when removing the upper cover assembly.
Close the covers of the tractor assemblies (3).
Slide the assemblies to the center of the printer unit.
5. Remove the two screws (4). The screws are at the back of printer, on the bottom.
6. Lift the rear part of the upper cover (5), pull it forward, and remove it.
7. Raise the access cover (6) 90° and remove it from the upper cover.
P/N 50071101 Separator: Sheet (Assembly) RSPL B.2.02
P/N 50071201 Separator: Sheet B.2.02
P/N 53510201 Support: Sheet B.2.02
P/N 51901101 Knob: Platen RSPL B.2.03
P/N 53510401 Guide: Sheet (L) B.2.02
P/N 53510301 Guide: Sheet (R) B.2.02
P/N 53510101 Cover: Access RSPL B.2.02
P/N 53510001 Cover: Middle RSPL B.2.02