OKIDATA ML380, Руководство по обслуживанию

Страница: 113 / 205

Page: 72
Service Guide ML380
Chapter 3 Maintenance & Disassembly
3.3.08 Paper Tear Off
General Information
This feature (when activated) will automatically advance continuous feed paper to the tear-off position
after it finishes printing the last page in the document. A few seconds after the printing stops, the printer
will move the paper up to the tear-off position, aligning the perforation with the serrated edge on the
access cover. The operator will be able to tear off the last printed page without wasting paper or
readjusting the printer. When the printer receives data to print, it will automatically return the paper to the
top of form position for printing.
Paper tear off can only be used with continuous feed paper fed in from the rear on the built-in push tractor.
It cannot be used with the optional pull tractor.
Procedure
1. Load continuous feed paper into the printer.
2. Verify that the printer is selected (SELECT lamp is lit).
3. Press the FONT and PITCH buttons at the same time. This places the printer in Menu Mode.
The SELECT lamp will go out.
4. Press GROUP until the following line is printed.
Vertical Control Line Spacing 6 LPI 5. Press ITEM to advance the Menu to Form Tear-Off.
6. Press SET to change the menu setting for Form Tear-Off.
To activate form tear off, the setting must be ON.
To deactivate form tear off, the setting must be OFF.
7. Press SELECT to exit Menu Mode.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)