Oki OKIFAX 5400, Руководство по обслуживанию

Страница: 26 / 448

40838301TH Rev.1 1 - 19
The transmitter sends a call-back message to the receiver
only when the receiver does not respond to voice request of
the transmitter.
The fax can transmit a programmed alphanumeric message,
such as company’s name, consisting of up to 32 characters.
* (Outside only)
Received TSI can be printed at the top of the received page.
* TF + 05 (To enable or disable this function)
The fax can automatically print out a power-outage report
when the power off condition occurs.
The fax can print out an activity report manually, and provides
a record of your fax machine's last 30 communications. This
report does not contain the results of messages which were
received without errors. However it does contain messages
received in memory with or without errors.
* REPORT P1(Manual printout)
The fax can print out a message confirmation report manually
or automatically in the following cases.
(1) When COPY key is pressed after a single location
call, this report can be printed.
(Manual printout)
* FP + 01 (To enable or disable automatic printing)
The fax can print out a broadcast entry report if specified
during operating sequence of a broadcast.
The fax can print out a broadcast confirmation report manu-
ally or automatically.
* COPY key (Manual printout): Pressed after a broadcast.
* REPORT PR 2 (Manual printout)
* FP +02 (To enable or disable automatic printing)
Table 1.6.1 (1/2) Reports and Lists Specifications
No. Item Specifications
1 Call-back message
2 Sender ID
3 Transmitting subscriber
identification(TSI) printing
4 Cancel report
(Power outage report)
5 Activity report
6 Message confirmation report
7 Broadcast entry report
8 Broadcast confirmation report
1.6 Reports and Lists
Table 1.6.1 shows Reports and Lists Specifications.
Note:
F +OT: Press FUNCTION and One-touch key
FP:
Function program setting
TF: Technical function setting