Oki OKIFAX 5400, Руководство по обслуживанию

Страница: 165 / 448

40838301TH Rev.1 6 - 3
Table 6.2 Routine Inspection
1 Scan Roller
2 Feed Rollers No. 1 and No. 2
3 Sub Roller
4 Pinch Rollers
5 ADF Roller
6 Contact Image Sensor
7 Separation Rubber
8 LED print head
9 Printer unit
10 Lubrication
11 Cleaning
Clean with wet cloth.
Clean with wet cloth.
If the surface of these rollers becomes dirty and
the dirt causes the transmitted image or the
local copied image to expand vertically, perform
this cleaning.
Clean with wet cloth.
Clean with ethyl alcohol.
Clean with wet cloth.
If the surface of this roller becomes dirty and the
dirt causes misfeeding of documents, perform
this cleaning.
Check for accumulation of paper dust, etc.
Clean with ethyl alcohol if necessary.
Clean with wet cloth.
If this rubber is worn out, replace this rubber.
(every one year)
Clean the surface of the head by moving the
tissue paper back and forth several times.
Clean the inside of the printer unit by using wet
cloth.
Apply MOLYKOTE EM-30L Greese (Made by
Dow corning co., ltd.) to the following parts:
a. Gears (every one year)
Remove materials that have fallen from outside,
if any.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Expected Use Before Reference Item No.
No. Part name
Replacement in Fig.6.2
6.2 Routine Inspection
Basically, the routine inspection of following items is performed about half-yearly (or every one
year) after the machine is installed. The description of routine inspection is shown in Table 6.2.