Oki MB492dn, Руководство пользователя

Страница: 664 / 1228

Calling Timer 60 mseconds,
Range: 1 -
255 seconds
Displays only if Service Bit is ON.
PBX Line OFF When connecting to PBX (internal exchange), put it to [ON].
Forwarding
Setting
Forwarding Setting OFF Sets whether to enable the fax forwarding mode.
Forwarding Number (NULL) Sets a fax number used for the fax forwarding mode.
TAD Mode Type 3 Sets an operation type in Tel/Fax Ready mode.
[Type 3]: A fax signal is detected in 15 seconds from when the
answering machine answers. Normally, use this type.
[Type 1]: A fax signal is detected right after the answering
machine answers, and then the reception starts. If you have any
fax reception problems, they may be improved if this type is set.
[Type 2]: A fax signal is detected right after the answering
machine answers. Set this type if you usually use this machine as
a phone.
Tel Priority Mode OFF Sets when the external telephone and the machine ring in
Tel/Fax Ready mode.
[ON]: The sender is assumed to make a voice call. The telephone
rings early.
CNG Detection OFF Sets whether to determine whether the sender is sending a fax
during the off the hook condition in Tel/Fax Ready mode.
T/F Timer Programming 35 seconds Sets when to start the auto fax reception if the communication
does not start even after an incoming call arrives in Tel/Fax
Ready mode or Ans/Fax Ready mode.
Soft Ringer Volume Middle Sets a phone ring volume in Tel/Fax Ready mode.
Remote Receive Number OFF Sets a remote switch over number.
663