Oki MB492dn, Руководство пользователя

Страница: 668 / 1228

Width 5 mm
(0.2 inch) Sets an erasing width.
Available range: 5 to 50 mm (0.2 to 2.0 inches)
E-mail
Setup
Configure Shortcuts 01:
Address
Book
02: Group
List
03: Tx
History
04: Manual
Input
05: LDAP
Sets the shortcut button for the [Scan To E-mail] tab.
File Name (NULL) Sets a file name. You can enter up to 64 one-byte characters.
The following options can be set.*
1
#n: adding a serial number from 00000 to 99999
#d: adding the date of a file creation (yymmddhhmmss)
(yymmddhhmmss)
Template Edit Subject (NULL) Registers or edits e-mail subject text. You can enter up to 80 characters.
Edit Body (NULL) Registers or edits e-mail body. You can enter up to 256 characters.
From /
Reply To
From (NULL) Sets the e-mail address that is displayed in the [From] field. You can enter up to
80 characters.
E-mail Sender
ID
(NULL) Sets the sender name that is displayed in the [From] field. You can enter up to
32 characters.
Reply
To
Address
Book
(NULL) Sets the e-mail address that is displayed in the [Reply to] column. You can enter
up to 80 characters.
Direct
Input
(NULL)
LDAP (NULL)
Broadcast Destination ON Sets whether an e-mail address confirmation screen is displayed before
broadcasting the e-mail.
MDN Response OFF Sets whether to request the MDN (message disposition notification) response.
A/R Full Print OFF Set whether to print the transmission and reception history reports
automatically.
MCF Report OFF Sets whether to print a confirmation after transmission of Internet fax and Scan
to E-mail.
Timeout of MCF Report 15 minutes Sets the timeout for printing a confirmation after transmission of Internet fax
and Scan to E-mail. If the setting period of time is exceeded, the report is
automatically printed without the MDN response.
Print Check Message OFF Sets whether to report the error content if a transmission error occurs.
USB
Memory
Setup
File Name (NULL) Sets the default file name. You can enter up to 255 characters.
The following options can be set as the default file name.*
1
#n: adding a serial number from 00000 to 99999
#d: adding the date of a file creation (yymmddhhmmss)
(yymmddhhmmss)
Shared
Folder
Setup
Configure Shortcuts 01: Color
Mode
02: Scan
Size
03: Duplex
Scan
04: File
Name
05:
Subfolder
Sets the shortcut button for the [Scan To Shared Folder] tab.
TWAIN
Setup
Network TWAIN ON Sets whether to use the Network TWAIN.
Port No.*
2
9967 Sets the port number.
Available range: 1 to 65535
WSD
Scan
Setup
WSD Scan Enable Specifies whether to use WSD Scan.
Binding Long Edge Sets the default binding position.
667