Oki MB492dn, Руководство пользователя

Страница: 596 / 1228

If a Power Failure Occurs
The operation of the machine
If a power failure occurs, the machine operates as follows.
Note
Since the machine is not turn on automatically, turn it on by pressing the power switch after the power is restored.
The operation that uses an uninterruptible power supply (UPS) or inverter is not guaranteed. Do not use an uninterruptible power
supply (UPS) or inverter.
Machine's
Status
Operation
During a call You can continue talking.
During a
transmission
The transmission stops halfway.
When the power is restored,
If a memory transmission is used, the machine automatically retransmits from the page on which the
transmission stopped.
If a real time transmission is used, the machine does not send the data again. Set the document, and then
specify the destination again to start the transmission.
During a
reception
The reception stops halfway.
If the machine received one or more pages, print the erased report after the power is restored. A received image is
not printed.
Copying or
printing a list
Printing stops halfway.
When the power is restored, start the print job again.
Idle You cannot start another copy, fax, scan, or print job.
You also cannot receive another fax.
Stored fax data
Backing up data in memory
The image data stored in the memory is retained even if a power failure occurs or you turn the machine off.
Erased report
If the fax data in memory is lost, an erased report is printed automatically.
The following documents are eligible for an erased report.
Fcode Box Document
Documents received in memory
An erased report informs you of the following items of deleted data.
Document type
Fcode box number
Fcode box name
Destination name
Fcode confidential communication/Fcode bulletin board communication
Time when communication started
Number of received pages
Memo
If a fax is received with the manual reception, Fcode polling reception, or Fcode confidential reception, its reception type is also
printed.
595