Oki MB451wMFP, Руководство пользователя

Страница: 76 / 198

Configuring the Network Settings
- 76 -
12
Enter the information in C-2.
Note

If domain management is performed, enter
"C-2@domain name".

When carrying out domain management, if you cannot
connect even after entering "C-2@Domainname",
delete "@Domainname".
Access the machine's website again, and set the
NetBIOS domain name in [
Workgroup name ] within
[ Admin Setup ] > [ Network Menu ] > [ NBT/
NetBEUI ].
*For the domain name, please check with the network
manager.
13
Select [ Enter ] and then press .
14
Press the to select [ Password ] and
then press .
15
Enter the value of C-3.
16
Select [ Enter ] and then press .
17
Press the to select [ File Name ] and
then press .
18
Enter the information in C-6.
- By adding "#n" to the end of the file name, a
serial number is automatically assigned to the end
of the name of sent files.
- By adding "#d" to the end of the file name, a date
is automatically assigned to the end of the name
of sent files.
19
Select [ Enter ] and then press .
20
Configure other items if necessary.
21
Press to register the settings.
The setup for Scan To Network PC is complete.
Reference

For details how to use Scan To Network PC, refer to "Scan
to Network PC" P. 109 .
Managing Profiles
To perform the Scan To Network PC, Auto Deliver
or Transmission Data Save function (for MB491/
ES4191 MFP Only), a profile for each destination
must be created. You can register up to 50
profiles.
Reference

Refer to "Creating a Profile for Scan To Network PC" P. 75
Modifying a Profile
1
Press the < SETTING > key on the
operator panel.
2
Press the to select [ Profile ] and then
press .
3
Press the to select the profile you
want to modify and then press .
4
Press the to select [ Edit ] and then
press .
5
Press the to select the item you want
to modify and then press .
6
Modify the item.
7
Select [ Enter ] and then press .
8
If you want to modify more than one
item, repeat steps 5 and 7.
9
Press to register the settings.
Deleting a Profile
1
Press the < SETTING > key on the
operator panel.
2
Press the to select [ Profile ] and then
press .
3
Press the to select the profile you
want to delete and then press .
4
Press the to select [ Delete ] and then
press .
5
Press the or to select [ Yes ] on the
confirmation message and then press .
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK