Connecting to a Computer
- 48 -
Memo
Start the WPS push button for wireless AP after
clicking [
Yes
] in the confirmation screen.
Alternatively, if WPS push button for wireless AP is
started first, start the WPS push button on this
equipment.
If [
No
] is selected, the screen returns to that from
step 6.
8
If [
Yes
] is selected in step 7, [
Running
pushbutton method...
] is displayed in
the screen.
Note
Panel operations cannot be performed during WPS
execution.
When [
Connection successful
] is displayed, this
equipment is connected to the wireless LAN.
Memo
If [
Timeout
] is displayed, it is possible that the
wireless AP of the connection destination could not be
found within the time limit. Select [
Yes
] again in step
7 within 2 minutes of starting WPS push button for
wireless AP.
If [
Overlap
] is displayed, WPS-push button is being
executed on 2 or more wireless AP. Please wait for a
short time and then retry.
Configuring automatically using
PIN method
1
Log in as the administrator.
2
Press the to select [
Network Menu
],
and then press the
.
3
Press the to select [
Network Setup
],
and then press the
.
4
Press the to select [
Wireless
Setting
], and then press the
.
5
Press the to select [
Set
automatically (WPS)
], and then press
the
.
6
Press the to select [
WPS-PIN
], and
then press .
7
Press the to select [
Yes
], and then
press .
Memo
Enter the displayed 8 character PIN code to the
wireless AP, and start WPS-PIN for the wireless AP.
Alternatively, if WPS-PIN for wireless AP is started
first, start the WPS-PIN on this equipment.
If [
Previous
] is selected, the screen returns to that
from step 6. Each time the confirmation screen is
displayed, the PIN code is automatically generated
and changed.
8
If [
Yes
] is selected in step 7,
[
Implementing PIN method...
] is
displayed in the screen.
Note
Panel operations cannot be performed during WPS
execution.
When [
Connection successful
] is displayed, this
equipment is connected to the wireless LAN.
OK
OK