Print settings and security > 68
PCL
EMULATION
When you click the
Properties
button from your application’s
Print dialog, the driver window opens to allow you to specify your
printing preferences for this document.
5550 Setup Tab_oda.jpg
1.
Paper size should be the same
as the page size of your
document (unless you wish to
scale the printout to fit another
size), and should also be the
same as the size of paper you
will feed into the MFP.
2.
You can choose the source of
the paper to feed, which may be
Tray 1 (the standard paper
tray), Tray 2 (if you have the
optional 2nd paper tray
installed) or the multi purpose feeder. You can also click on
the appropriate part of the screen graphic to select your
preferred tray.
3.
The setting for paper weight should match the type of paper
on which you intend to print.
4.
A variety of document finishing options can be selected,
such as normal one page per sheet, or N-up (where N can
be any number up to 16) for printing scaled down pages at
more than one page per sheet. Booklet printing prints two
pages per sheet on each side of the paper so that when
folded they make up a booklet. Booklet printing requires the
duplex unit to be installed in your MFP.
Poster printing will print large pages as tiles spread over
multiple sheets.
5.
For two-sided printing, you can choose to flip the page by
the long edge or the short edge. Of course, this requires that
a duplex unit be installed in your MFP.
6.
If you have changed some printing preferences before and
saved them as a set, you can recall them to avoid having to
set them individually each time you need them.
7.
A single on-screen button restores the default settings.
