Oilon RE 110, Инструкция по установке и эксплуатации

Страница: 21 / 52

RE03 1406 EN 19 (48)
Connection Legend Temperature sensor
x BX4 Hot gas, compressor 2
w BX3 Desuperheater sensor
u BX2 Buffer tank lower part
t BX1 Buffer tank middle part
s BX14 Brine out
r BX13 Brine in
q BX12 Return water, heating circuit P
p BX11 Supply water, heating circuit 1
n BX10 Supply water, heating circuit P
k BX9 Outdoors temperature sensor
h BX8 Buffer tank upper part/domestic hot water buffer tank
f BX7 Hot gas, compressor 1
f – x M Ground
For more information on sensor connections, see chapter Piping diagrams .
Place the outdoors temperature sensor so that it is not in direct
sunlight or on the sunny side of the building.
Electrical connections
Connect condenser pump and ground circulation pump electrical feed according to the
wiring diagram.
If more than one heat pump have been connected in parallel, install own ground circuit
pump and condenser circuit pump for each heat pump.
Device Connector
Feed cable 1-phase -Q1 1
2-phase -Q1 2
3-phase -Q1 3
Ground circuit pump 1-phase -X1 1
2-phase -X1 2
3-phase -X1 3
Condenser circuit pump 1-phase -X1 4
2-phase -X1 5
3-phase -X1 6
Domestic hot water charging pump 1-phase -X1 7
2-phase -X1 8
3-phase -X1 9
Desuperheater circuit pump
(optional)
1-phase -X1 10
Pump zero line and earthing line -X0 N P