1. Tap the temperature value in the middle of the
house icon.
● The change will apply only to the selected
heating circuit.
2. Change the setting, and tap
OK
. In the figure, the
target temperature value has been set to +22 °C.
● To only check the setting, simply open the
setting window but leave the setting unaltered.
If room temperature optimization is disabled, the
Increase or decrease heating
option will be
displayed instead (see sub-section
Increase or
decrease heating
).
2.3 The domestic hot water display and the boost function
The domestic hot water boost function will raise domestic hot water temperature to a
set target temperature and keep it there for a set time. The boost function increases the
supply of domestic hot water. After the boost period, the target temperature will return
back to its original level.
The value at the top of the water drop shows the
domestic hot water tank’s measured temperature.
1. To activate the domestic hot water boost function,
tap the thermometer icon.
M8004 2308EN
9 (49)
