Maker: Nanaboshi Scientific Research
Model: NCR-16-3-R
1-COM: (low potential)
2-Unused
3-Completion signal: (when the set
number is taken out from the shoot box)
- １１ -
５
-
7
．
External output （Option)
When the set number of screws have been delivered and the screws are removed with the unloading lever, a 500ms signal is
output from the external output connector.
〇
Signal rating
Direct current max 100mA
Applied voltage 5 to 24V (max 27V)
取出しレバー
Unloading Lever
Open
Close
Auto Start
On
Off
ネジカウントセンサー
(シュートボックス)
Screw Count Sensor
(Shoot Box )
On
Off
完了信号
Complete Signal
On
Off
500ms
供給機
Screw Feeder
外部出力
External Output
設定数５の場合
When the number of settings is 5
If the screw is not supplied to the tip of the rail for a certain period of time, the vibration of the rail will increase.
The vibration of
the rail is increased regularly in order to eliminate the biting of the screws in the scooping chamber. The vibration noise becomes
stronger, but this is not a malfunction.
５
-
5
．
Forced vibration of rail
５
-6．
Instant motion of slide unit
When the rail sensor detects the screw but the passage sensor cannot detect the screw after the escape operation, the slide
block repeats a instant motion to eliminate the screw catching.
〇
Connector
〇
Time chart
【
Note
】
The length of the signal line should be within 3m.
Use with the signal terminal set to high potential and
the COM terminal set to low potential.
