4/Service
4-5
4-5
6600 0341 000
08/15/99
Useful tools for the mechanical repair procedures are as follows.
#1 Phillips screwdriver
.05 inch hex key wrench
3/16 inch flat blade screwdriver
9/16 inch socket
5/16 inch socket
3/16 inch socket
Tweezers
3/8 inch socket
Mate-N-Lok pin removal tool
1/4 inch drive socket set, with
or equivalent
four inch extension
Replacing a fuse
Refer to figure 4-1.
To replace a fuse
1.
Switch the light source off and disconnect the power cord from the power source.
2.
Place the tip of a small flat head screw driver under the tab next the power switch
on the power receptacle, and pry the fuse door open.
3.
To replace either fuse, place the screw driver tip between the end one of the fuse
holder and the power switch and pull out the holder.
Note: the arrows on the end of the fuse holder should match those on the inside of the
fuse door to ensure correct fuse polarity.
Figure 4-1
Replacing a fuse
4.
Replace fuse with the correct replacement fuse.
Power switch
Fuse door
Power receptacle
Fuse
Fuse holder
CI.17.015
Содержание BiliBlanket Plus
