Ohmeda BiliBlanket Plus, Руководство по эксплуатации, техническому обслуживанию и ремонту

Страница: 18 / 48

2/Operation
2-6 2-6
6600 0341 000 04/25/00
1. Place infant on light pad covered 2. Secure disposable vest around infant.
with a disposable vest.
Placing the infant onto the pad with vest
CAUTION
w
Lamp life is greatly reduced if the lamp or the light source is subjected to shock
or bumping, or if the unit is moved while the bulb is hot. Allow the bulb to cool
for at least ten minutes before moving the unit.
10. When the treatment is completed, switch off the light source power switch and
remove the pad and vest. Remove and discard the disposable vest.
Using the transilluminator
WARNING
w w w w w
Light from the tip of the tranilluminator is a form of energy and can cause
heating of the skin. Reposition the tip of the transilluminator often, particularly
if you notice redness of the skin. In this case you may consider lowering the
light output with the intensity control knob to avoid heat burn.
1. Remove the phototherapy fiber optic cable from the light source.
2. Using the mode select slide switch, select transilluminator.
3. Insert the transilluminator light pipe into light port.
4. Turn power switch on.
5. Adjust the light intensity using the variable intensity knob.
6. When the transilluminator is no longer needed, return to phototherapy mode.
7. Turn off the power switch.
8. Disconnect the transilluminator light pipe.
9. Using the mode selector switch, select phototherapy.
10. Connect the phototherapy cable to the light port.
CI.01.027,029