3/Maintenance
3-2
3-2
6600 0341 000
04/25/00
1.
Unplug the power cord and allow the light source to cool for at least ten minutes.
2.
Clean the outside of the light source using a mild detergent solution on a damp
cloth or sponge. Aqueous solutions which are both hospital disinfectants and
mycobactericides may be used.
Do not allow liquids to seep into the housing.
Dry the light source surface with a clean, soft, cloth.
3.
The pad assembly and transilluminator must be cleaned without immersing by
using a disinfecting agent safe for use on the materials. Aqueous solutions which
are both hospital disinfectants and mycobactericides may by used.
Never use an abrasive cleaner on the pad, the cable, the connector or the transillu-
minator.
4.
Thoroughly rinse the pad to remove any cleaning solution residue.
CAUTIONS
w
Do not use a phenolic compound based cleaner. Phenolic compounds have
been associated with elevated bilirubin levels in infants.
w
Exposing the fiber-optic pad’s plastic cover to strong cleaning solutions or
ultra-violet light can cause premature breakdown of the plastic material. Clean-
ing solutions that discolor the pad, such as iodine solutions, will reduce the
pad’s light output. Do not place the pad in direct sunlight. Do not use iodine
solutions, strong acids, strong alkali, or bleach solutions to clean the pad.
The following table lists some cleaning solutions:
Generic Formulation:
Maximum concentration level:
Hydrogen peroxide
6%
Sodium hypochlorite
100 parts/million
Cavicide
®
100% spray
Table 3-1
Cleaning and disinfecting solutions
Bulb replacement
WARNINGS
w
Disconnect the power cord from the power source before opening the
bulb access door.
w
Allow the bulb to cool for at least ten minutes before attempting to re-
move it.
CAUTION
w
To ensure the proper operation and light intensity, replace the bulb only with
the Ohmeda bulb listed in Specifications in the Appendix. Use of other bulbs
will affect the performance of, and may result in damage to, the BiliBlanket
Plus High Output Phototherapy System.
Содержание BiliBlanket Plus
