2/Operation
2-2
2-2
6600 0341 000
04/25/00
Non-recommended lamps
Using any lamp other than that recommended and distributed by Ohmeda for the
BiliBlanket Plus High Output system will affect the performance of and may result in
damage to the light source or the fiber optic pad or transilluminator.
Checkout procedure before operation
Before operating the Ohmeda BiliBlanket Plus High Output Phototherapy System, the
following steps should be taken to ensure that the BiliBlanket Plus High Output will
provide effective phototherapy treatment or the transilluminator delivers the proper
light. This checkout procedure assumes that you are familiar with the unit’s controls.
CAUTIONS
w
Lamp life is greatly reduced if the lamp or the light source is subjected to shock
or bumping, or if the unit is moved while the bulb is hot. Allow the bulb to cool
for at least ten minutes before moving the unit.
w
Do not allow the fiber optic cable, pad or transilluminator to rub on sharp or
abrasive surfaces. The protective coverings may be damaged.
w
Observe the following fiber optic cable and pad assembly and transilluminator
guidelines:
• If you hang the fiber optic cable and pad or transilluminator assembly for tempo-
rary storage on an IV pole, door, wall hook or similar item, do not pull the cable
when removing it for use. Carefully lift the cable free of obstructions when ready
to use it.
• Do not lay the fiber optic cable or transilluminator where it could be crushed.
• Do not place anything on the fiber optic cable or transilluminator.
Not observing the guidelines may cause excessive stress and may:
• damage the cable’s outer protective conduit,
• damage the cable’s optical fibers,
• decrease light intensity at the light pad or transilluminator.
Checkout procedure
1. Place the light source on a flat, level surface (or use the mounting slide bracket) to
locate the light source within a few feet of the treatment location.
2. Verify that the air circulation vents on the sides of the light source are unobstructed.
The air filter should be free from excessive amounts of lint.
Содержание BiliBlanket Plus
