OHAUS Ranger Count RC1P1502, Инструкция по эксплуатации

Страница: 3 / 40

Ranger™ Count 3000 Series EN-1
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the Ranger™
Count 3000 Series. Please read the manual completely before using the scale.
1.1 Definition of Signal Warnings and Symbols
Safety notes are marked with signal words and warning symbols. These show safety issues and
warnings. Ignoring the safety notes may lead to personal injury, damage to the instrument,
malfunctions and false results.
Signal Words
CAUTION
for a hazardous situation with low risk, resulting in damage to the device or
the property or in loss of data, or injuries if not avoided.
Note
(No symbol)
For useful information about the product
Warning Symbols
Attention Symbol
Alternating Current
1.2 Safety Precautions
Please follow these safety precautions:
 Verify that the AC input voltage printed on the data label matches the local AC power
supply.
 Do not drop loads on the platform.
 Make sure that the power cord does not pose a potential obstacle or tripping hazard.
 Do not position the scale in a way that makes it difficult to pull the power plug.
 Use only approved accessories and peripherals.
 Operate the scale only under ambient conditions specified in these instructions.
 Disconnect the scale from the power supply when cleaning.
 Do not operate the scale in hazardous or unstable environments.
 Do not immerse the scale in water or other liquids.
 Do not place the scale upside down on the platform.
 Only use weights within the scale’s capacity as specified in these instructions.

Service should be performed only by authorized personnel.
2. INSTALLATION
2.1 Package Contents
 Scale
 Pan
 Power Cord
 Sub-platform
 Instruction Manual / CD
 Warranty Card