OHAUS Ranger Count RC1P1502, Инструкция по эксплуатации

Страница: 24 / 40

EN-22 Ra
nger™ Count 3000
Series
4.7 COM1 Menu
Enter this menu to define communication parameters. Default settings are in
bold
.
Note:
The COM2 menu is only displayed if a second interface is installed.
Reset
[
reset
]
Reset the COM menu to factory defaults.
NO = no reset
YES = reset
Baud Rate
[
BAUD
]
Set the baud rate.
300 = 300 bps
600 = 600 bps
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
Parity
[ paritY ]
Set the data bits and parity.
7 EVEN = 7 data bits, even parity
7 ODD = 7 data bits, odd parity
7 NONE = 7 data bits, no parity
8 NONE = 8 data bits, no parity
Stop bit
[
stOP
]
Set the number of stop bits.
1 = 1 stop bits
2 = 2 stop bits
Handshake
[
H.shake
]
Set the flow control method. Hardware handshaking is only available for COM1 menu.
NONE = no handshaking
ON-OFF = XON/XOFF software handshaking
Reset:
no
, yes
Baud Rate: 300…
9600
…19200
Parity: 7 even, 7 odd, 7 none,
8 none
Stop bit:
1
, 2
Handshake:
none
, On-Off
Alternate command: Print (A…
P
…Z), Tare (A…
T
…Z), Zero (A…
Z
)
End COM: Exit menu