OHAUS Defender 2200, Инструкция по эксплуатации

Страница: 20 / 46

Defender 2200 Bench Scale EN-18
3.5 Readout Menu
Enter this menu to customize display functionality.
Reset
Stable
Filter Level
Auto-Zero Tracking
Sleep (T22ME)
Light (T22ME)
Backlight (T22MC)
Auto Off Timer
Expand
End Readout
No , Yes
0.5d, 1d , 2d, 3d
Lo, Med , Hi
Off, 0.5d , 1d, 3d
Off, On
Lo,
Med , Hi
Off, On, Auto
Off , Set 1, Set 2, Set 5
Off , On
Exit Readout menu
3.5.1 Reset
Reset the Setup menu to the factory defaults.
No = not reset.
Yes = reset.
3.5.2 Stable
Set the amount the reading can vary while the stability symbol remains on.
0.5 d = 0.5 divisions
1 d = 1 division
2 d = 2 divisions
3 d = 3 divisions
3.5.3 Filter
Set the amount of signal filtering.
LO = less stability, faster stabilization time
MEd = normal stability, stabilization time
HI = greater stability, slower stabilization time
3.5.4 Auto-Zero Tracking
Set the automatic zero tracking functionality.
OFF = disabled.
0.5 d = the display will maintain zero until a drift of 0.5 divisions per second has
been exceeded.
1 d = the display will maintain zero until a drift of 1 division per second has been
exceeded.
3 d = the display will maintain zero until a drift of 3 divisions per second has been
exceeded.
NOTE : When the LFT menu item is set to ON, the selections are limited to 0.5d. The setting is
locked when the hardware lock switch is set to the ON position.