OHAUS Defender 2200, Инструкция по эксплуатации

Страница: 28 / 46

Defender 2200 Bench Scale EN-26
4.4 Changing Units of Measure
Press and hold the PRINT Units button until the desired measuring unit appears. Only measuring units enabled
in the Unit Menu will be displayed (refer to Section 3.7).
4.5 Printing Data
Printing the displayed data to a printer or sending the data to a computer requires that the communication
parameters in the Print Menu are set (refer to Section 3.8).
Press the
PRINT Units button to send the displayed data to the communication port (the Auto-Print Mode in
Section 3.8 function must be Off).
4.6 Application Modes
Only modes enabled in the mode menu will be displayed (refer to Section 3.6).
4.6.1 Weighing
Place the item to be weighed on the scale. The illustration indicates a sample of 1.5
kg, Gross weight.
Note: To return to the Weighing mode from the other modes, press and hold the
Mode button until WEIGH is displayed.
4.6.2 Parts Counting
Use this mode to count parts of uniform weight. The Indicator determines the quantity
based on the average weight of a single part. All parts must be uniform in weight for
accurate measurements.
To enter the Parts Counting mode, press and hold the
Mode button until Count is
displayed.
Average Piece Weight (APW)
When the Mode button is released, Clr.PW Pcs is displayed.
NOTE
: If no APW has been previously stored, the Clr.PW display is skipped and the
display shows PUt10Pcs.
Clearing a Stored APW
Press the Yes button to clear the stored APW.
Recalling a Stored APW
Press the No button to recall the existing APW, then proceed to counting operation.