Long
(6 seconds)
Long
(6 seconds)
Long
(6 seconds)
PROCESS VALUE DISPLAY
SET VALUE DISPLAY
AND ADJUSTMENT
Level 1
Level 2
Level 3
Level 4
Table 5.2 Control Function
and Display Flow Chart
The "return" key ( )can be pressed at any time.
This will prompt the display to return to the
Process Value/Set Value.
Power Applied:
1.
Displayed for 4 seconds
(Software Version 3.3 or higher)
2. LED test.
All LED segments must be lit for 4 seconds.
3. Process value and set point indicated.
.
WARNING: Do not enter Level 4 unless you have proper calibration
instruments. Refer to Page 19 for further information.
