OfiTE HTHP Скачать руководство пользователя страница 3

Страница: 3 / 56

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

When extremely high-temperature and/or high-pressure viscosity

measurements are required, the OFITE HTHP viscometer is the solution. This

fully-automated system accurately determines the rheological properties of

completion fluids and drilling fluids in terms of shear stress, shear rate, time,

and temperature at pressures up to 30,000 PSI (207 MPa) and temperatures

up to 500°F (260°C). An optional chiller is available for those situations

in which the fluid sample needs to be cooled, rather than heated, further

increasing the flexibility of the system.

Like OFITE’s other computer-controlled viscometers, the HTHP Viscometer

features our easy-to-use ORCADA

software. Using this exclusive software,

a computer novice can operate the HTHP Viscometer, and yet the system is

versatile enough for advanced research and demanding test parameters.

The HTHP Viscometer uses a compass to detect the rotation of a magnet at

the top of the torsion assembly. The influence of the powerful drive magnets

inside of the shield, the earth’s magnetic field, the magnetic properties of the

shield, spring non-linearities, magnetic fields and masses in the laboratory,

non-ideal fluid flow, and small geometry variations all combine to make the

angle display non-linear if not compensated. The microprocessor allows for

easy compensation for those effects.

Your HTHP Viscometer has been shipped with everything you need to begin

testing. It includes a computer with all necessary software already installed.

Intro

Содержание HTHP

























































Результаты поиска

Содержание HTHP

Отзывы:

Похожие инструкции для HTHP

Бренды по названию

Популярные бренды

OfiTE HTHP, Инструкция по эксплуатации

Результаты поиска

Содержание HTHP

Отзывы:

Похожие инструкции для HTHP

Бренды по названию

Популярные бренды