OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
27
Software
Test Builder
The Test Builder is designed to help you build custom tests for use in
Auto
mode. To access the test builder, go to the Main Screen and choose “Test
Builder” from the “Edit” menu.
1.
To create a new test, click the “New Test” button. To create a new
test based on one of the “RP 10B”, “RP 13D”, or “RP 39” analysis
models, click the appropriate button at the top of the screen to open
a template. To edit an existing test, select the test from the list in the
upper left-hand corner of the screen.
2.
Enter a name in the “Test Name” field.
3. Choose an Analysis Model.
a. “RP 39” -
Power Law Model - records the Power Law calculations
(n and k)
b. “RP 13D” -
Bingham Plastic Analysis Models - records plastic
viscosity (PV) and yield point (YP)
c. “RP 10B” -
Power Law and Bingham Plastic Models combined
4.
Input the values for your test into the fields in Record 1.
a. “Heat Time” -
the time it will take the unit to heat the sample to
the temperature setpoint. If this field is left blank, the unit will heat
the sample as fast as possible.
b. “Heat RPM” -
the rotational speed during the heating period
c. “Temp” -
the temperature setpoint. Enter any letter in this field to
indicate “Ambient”.
Test Detail
Records
Available Tests
