ODA MX Series, Руководство пользователя, Страница: 87 / 92

7-2. Hardware Error
-200, "System interface error"
It appears when SCPI Module is out of order.
-201, "ADC operating failed"
It appears when circuit of ADC part is out of order.
-202, "Front panel operating failed"
It appears when front panel does not respose.
-255, "Error not define"
It appears when unknown error occurs.
7-3. Remote Calibration Error
Refer to "4-6. Remote Interface Calibration(for GPIB)."
-20, "Ignored min run under volt"
If you set the "max" command or value input of calibration without voltage "Min"
calibration operating at first.
Procedure : Min → VALUE → MAX → VALUE
-21, "Ignored min save under volt"
If you set the "max" command without "Value" of voltage "Min" calibration operating.
Procedure : Min → VALUE → MAX → VALUE
-22, "Invalid min value use under volt"
After sent the command of voltage "Min" value and then you sent the value command without
Max command calibration operating.
Procedure : Min → VALUE → MAX → VALUE
- 83 -