ODA MX Series Скачать руководство пользователя страница 22

Страница: 22 / 92

Overview

1. Activating Constant Voltage (CV)

Description for the activation of constant voltage output mode.

2. Activating Constant Current (CC)

Description for the activation of constant current output mode.

3. Remote Voltage Sensing

Description for the DUT’s remote voltage sensing.

4. Programming Over Voltage Protection (OVP)

Description for over voltage protection.

5. Programming Over Current Protection (OCP)

Description for over current protection.

6. Programming Under Voltage Limit (UVL)

Description for the under voltage limit.

7. Programming Over Voltage Limit (OVL)

Description for the over voltage limit.

8. Programming Under Current Limit (UCL)

Description for the under current limit.

9. Programming Over Current Limit (OCL)

Description for the over current limit.

10. Key Lock

Description on how to enable and disable the front panel lock.

11. IO/Local

12. Limit Display

Description on viewing the set voltage/current value and the actual output value.

13. Store

Description on saving power supply information on the 『User Memory』.

14. Recall

Description on applying the data saved on the 『User Memory』on power supply.

15. Output ON/OFF

Description on the approved output status and disabling of output voltage.

16. Error Message Display

Description on checking power supply’s errors.

You can set the remote interface method by pressing the front panel’s I/O Local key.

- 19 -

The key used to enter the menu is the “confirm” key for easy and convenient control.

Description on how to set the remote interface and switch to local mode, including
related
error message displays.

Note1

Содержание MX Series





























































































Результаты поиска

Содержание MX Series

Отзывы:

ODA MX Series, Руководство пользователя, Страница: 22 / 92

Результаты поиска

Содержание MX Series

Отзывы: