manualshive.com logo in svg

ODA MX Series, Руководство пользователя, Страница: 21 / 92

Поделиться
Скачать
ODA MX Series Скачать руководство пользователя страница 21

It's safe to connect DUTs after a pre-check of the voltage and current output.
The procedures below explain how to proceed with the pre-check.

Voltage Output Check

▌To check the output voltage, follow the procedures below.

  1. Connect power to the unit.

  2. After the self-checking mode, switch the unit to “

**OUTPUT OFF**

”

      mode and leave power supply on standby.
  3. Connect the output port to a DVM appropriate for measuring the voltage.

 

  4. Press the Output On/Off Key so that the voltage is outputted from the output port.
  5. Press the Limit Display Key to display the set voltage.
  6. Press the left cursor key to move the cursor to your desired voltage. 
  7. Turn the voltage encoder switch clockwise or counter-clockwise to control the voltage.
  8. Compare the voltage displayed on the LCD and the voltage measured with the DVM.

Current Output Check

▌To check the output current, follow the procedures below.

  1. Connect power to the unit.

  2. After the self-checking mode, switch the unit to “

**OUTPUT OFF**

”

      mode and leave power supply on standby.
  3. Press the Output On/Off Key so that the voltage is outputted from the output port.
  4. Press the Limit Display Key to display the set voltage.
  5. Press the left cursor key to move the cursor to your desired voltage. 
  6. Turn the voltage encoder switch clockwise for 5V.
  7. Press the right cursor key to move the cursor to your desired current.
  8. Turn the current encoder switch clockwise or counter-clockwise to control the current.

  9. Press the Output On/Off Key to switch the output to “**OUTPUT OFF**" mode.

  10. Connect the output port to a DAM appropriate for measuring the voltage.
  11. Press the Output On/Off Key so that the current is outputted from the output port.
  12. Compare the current displayed on the LCD and the current measured with the DVM.

3. Front Panel Operation

 -  18 - 

To cancel the menu for each feature, press the IO/Local, Protection, Store, or Recall key.
Otherwise, if no other events occur, the unit will automatically switch to local mode after about
5 seconds.

The key used to enter the menu is the “confirm” key for easy and convenient control.

Содержание MX Series





























































































Отзывы:

Нет отзывов